Making Rawhide that Stays Flat for Shields - Crazy Crow Trading Post
Making Rawhide that Stays Flat for Shields - Crazy Crow Trading Post

Rate This Article

 

Native American Indian Powwow Dancing & Etiquette

Native American Online Resources

Provided by Crazy Crow Trading Post

Native American Indian Powwow Dancing & Etiquette

Native American Online Resources

Provided by Crazy Crow Trading Post

Making Rawhide that Stays Flat for Shields - Crazy Crow Trading Post

There are several steps in using powder paints/earth pigments to paint rawhide:

Understanding Why Rawhide Warps

Bottom Line: Rawhide will always be subject to warping due to humidity. Also, since rawhide is not uniformly thick it will expand and shrink accordingly. Additionally, if it is painted, the rawhide will absorb some moisture, causing it to expand in the painted areas but not in the unpainted areas.

For rawhide that is not permanently stretched in a frame, etc., there is no ready solution to be able to get it perfectly flat and for it to stay that way. It will always be warping whenever the humidity changes. (Even bringing it out of the house for several hours, then returning it can subject it to humidity changes.)

The only good partial solution to keep rawhide fairly flat is to physically wrestle with it and try to bend it over the knee, etc., in the areas that are warped the worst in an effort to get it somewhat flat.

Keeping it Flat: The “Old Way” to Make a Shield:

If really FLAT rawhide that won’t change shape is desired, then a fresh green hide is required. (The hip section of a buffalo or cow is desired – NOT the hump, as has been reported erroneously in the literature.) This should be a section about 3 times the size of the desired finished shield, and then it must be fleshed and de-haired.

For information on painting your rawhide shield, see Powder Paint Preperation & Application Tips.

Making Rawhide that Stays Flat for Shields - Crazy Crow Trading Post
Making Rawhide that Stays Flat for Shields - Crazy Crow Trading Post
  • Dig a pit about 15″-18″ deep with a diameter a little larger than the size of the finished shield.
  • Heat enough rocks to half fill the pit. This will take 3-4 hours.
  • After the rocks are heated, place them in the pit, and then the rawhide is staked all around the edge of the hole except for about a 12″ gap. See Figure 1.
  • The un-staked edge is lifted and water is thrown in on the hot rocks. See Figure 2.
  • Then the rest of the hide is staked down.
  • The rawhide will immediately start to visibly shrink, and the crafter must continually rub it with a wet rag to keep it from getting hot spots from uneven heat distribution.
  • Every so often, the hide has to be re-staked as the edges of the hide move closer in to the edge of the pit, and the hide will be shrinking and start to pull the pegs out.
  • When the hide is re-staked, more water must be sprinkled on the rocks and sometimes new hot rocks are put in, as well.
  • This process goes on all afternoon, but, at the end of the day, the hide has shrunk to about 1/3 its original diameter, is about 3x as thick, and unlikely to be noticeably affected by humidity.
  • Of course, when the shrinking is done, the peg holes should be cut off around the edges to make a nice, neat shield.
  • This is normally an all-day process and must be done if one wishes to make a completely authentic shield that will retain its shape regardless of almost any conditions.

Crazy Crow Articles

Crazy Crow Trading Post Crow Calls Sale

Current Crow Calls Sale

March – April 2024

Take advantage of great deals during our March – April Crow Calls Sale! SAVE 10%-20% on popular powwow, rendezvous, historic reenactor, bead & leather crafter supplies. Don’t miss the savings on many popular items like Missouri River Deluxe Hunting Bags, Plains Hard Sole Moccasin Kits, 18th & 19th Century Footwear: Men’s & Women’s Colonial Shoes with Buckles, Riflemen’s Half Boots & Civil War Brogans, Colonial Clothing: Waistcoats, Knee Breeches, 1850s Waistcoats & Frockcoats, Pow-Wow Drums, Hand Drum Kits, Plains Style Lance & Spear Heads, Dream Catchers & Mandalas, Traditional Serapes & so much more!

Rate This Article