Trekker Half Boots - Brown

Waterproofing Crazy Crow’s Trekker Half Boots

Any of the various commercial boot waterproofing products such as shoe grease or wax can be used to waterproof our Trekker Half Boots, and we recommend Huberd’s Shoe Grease as it is one of the best. Keep in mind that this will cause the leather to have a finish that is more smooth and lose its suede effect, but it's the only way to truly waterproof them. Beeswax is another such treatment. It can be mixed with bear fat for a more traditional waterproofing compound. Unfortunately, we are not allowed to sell bear products in Texas so you’ll need to find that on your own!

A suggestion on using wax for waterproofing:
Wax best suits leather and suede boots. If you use a wax to waterproof your boots, warm it slightly with a hairdryer and apply it with a clean cloth. Remove any excess wax and buff to shine. Applying wax is more of a manual process, but it's great at working its way into more of the nooks and crannies of the boots for more complete coverage and protection.

MAKE SURE YOUR BOOTS ARE CLEAN
Before you start the waterproofing process, give your boots a thorough cleaning. Dirt and grime can get in the way of the waterproofing product, causing the treatment to not fully cover the boots. It is always a good idea to keep your boots clean to extend their lifespan.

Start by removing the laces and using a brush to remove any dirt or grime. If the soles of the boots are caked with dirt, place them in about an inch of water for a few hours to loosen the crud. Any remaining dirt can then be removed by spraying it with a hose.

Here is a link to a good article on this by Dick's Sporting Goods: How to Waterproof Your Boots